To setup the automatic human tracking feature, the following steps can be used:

**Please bear in mind the setup button on android devices is called setting, and the call button on android devices is called transfer.**

1. Open the CamHipro app
2. Go to 'Preset position'
3. Move the camera to a chosen 'home' position (the position you wish the camera to return to once it has finished tracking a person)
4. Enter 99 and then setup as this locks in the 'home' position
5. Enter 100 and then call to start human tracking

Once automatic human tracking is active, the camera will always return home when the person it was tracking is out of range. 

If you wish to to turn off automatic tracking at any point, enter 103 in 'Preset position' and then press call.